Description: Engine startup error The machine engine, controlled by the BICU (Base Image Control Unit), was operating incorrectly when the machine was switched on or returned to normal operation from the energy save mode.
Causes: • Check the connections between BICU and controller • BICU defective • Controller board defective • PSU defective
Description: Controller startup error After power on, the line between the controller and the operation panel did not open for normal operation. After normal startup, communication with the controller stopped.
Description: Finisher transport motor error The encoder pulse of the finisher transport motor does not change state (high/low) within 600 ms and does not change after 2 retries.
Causes: • Finisher transport motor defective • Transport motor harness disconnected, or defective • Finisher main board defective
Description: Finisher jogger motor error The finisher jogger HP sensor remains de-activated for more 1,000 pulses when returning to home position. The finisher jogger HP sensor remains activated for more than 1,000 pulses when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger mechanism overload • Jogger motor defective (not rotating) • Finisher main board defective • Harness disconnected or defective
Description: Front shift jogger motor error (B703) The sides fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Shift jogger motor disconnected, defective • Shift jogger motor overloaded due to obstruction • Shift jogger HP sensor disconnected, defective
Description: Rear shift jogger motor (B703) The side fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code
Causes: Motor harness disconnected, loose, defective Motor defective Motor overload HP defective boar
Description: Shift jogger retraction motor error (B703) The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Motor defective • Motor overload • HP defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.