Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B188 Aficio 480W Dolphin-C2 — Trang 3/12

Code: SC504

Description: Cassette Tray 4 feed error
After the tray was closed, the lift sensor in Tray 4 did not switch on within 20 s after the tray lift motor switched on. -or-The lift sensor did not switch off within 1 s four times after the tray started to descend.
Causes: • Lift motor connector loose, disconnected, broken. • Paper or other foreign object has jammed the tray lift motor. • Pickup solenoid connector is loose, disconnected, damage. • An obstruction in the mechanical operation of the pickup solenoid • Replace the tray lift sensor.

Code: SC506

Description: Cassette feed motor error
The cassette feed motor lock signal remains HIGH longer than 2 sec. during operation. Note: When this SC occurs, paper feed from the cassette is not possible. However, feed can continue from Trays 1, 2.
Causes: • Drive mechanism overload. • Motor driver defective

Code: SC507

Description: Registration motor lock
The registration motor lock signal is high longer than 5 s during operation.
Causes: • Drive mechanism overload. • Motor defective.

Code: SC531

Description: Fusing drive motor error
The fusing drive motor lock signal remained HIGH for 5 sec.
Causes: • Fusing motor drive mechanism overloaded. • Motor defective.

Code: SC532

Description: Left fusing pressure motor home position error 1
The left pressure motor did not return to home position 9 s after the left pressure motor started.
Causes: • Motor drive mechanism overload. • Motor defective. • Pressure home position sensor defective.

Code: SC533

Description: Left fusing pressure motor home position error 2
The left pressure motor was still at the home position 1.5 s after the start signal turned on.
Causes: • Possible Cause • Motor drive mechanism overloaded. • Motor defective. • Pressure home position sensor defective or disconnected.

Code: SC534

Description: Right fusing pressure motor home position error 1
The right pressure motor did not return to home position 9 s after the right pressure motor started.
Causes: • Motor drive mechanism overloaded. • Motor defective. • Pressure home position sensor defective.

Code: SC535

Description: Right fusing pressure motor home position error 2
The right pressure motor was still at the home position 1.5 s after the start signal turned on.
Causes: • Motor drive mechanism overloaded. • Motor defective. • Pressure home position sensor defective or disconnected.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie