Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B188 Aficio 480W Dolphin-C2 — Trang 11/12

Code: SC919

Description: External controller down
Causes: • Turn the machine off. • Check the I/F cable to determine if it became disconnected during operation. • Turn the machine on.

Code: SC920

Description: Printer error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective; turn the machine off/on, or change the controller firmware • Insufficient memory

Code: SC921

Description: Printer error 2
When the application started, the necessary font was not on the SD card.
Causes: • Font not on the SC card

Code: SC925

Description: Net File function error
Causes: • Refer to the four procedures below

Code: SC954

Description: Printer Image Setting Error
The IPU did not issue the signal required to start image processing for the printing mode within 60 s after the paper stops for registration.
Causes: • Software defective • Replace the software (all firmware modules). • IPU defective

Code: SC955

Description: Memory Setting Error
Settings required for memory to start image processing are not sent from the IPU within 60 s after the paper stops for paper stops for registration
Causes: • Software defective. Replace the software (all firmware modules). • IPU defective

Code: SC964

Description: Scanner start signal error 1
The scanner receives another start signal after scanning has already started.
Causes: • Software defective. • Replace the software (all firmware modules).

Code: SC965

Description: Print start signal error 2
The printer received another print start signal after print job has already started.
Causes: • Software defective. • Replace the software (all firmware modules).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie