Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B234 MP9000 B-C3 — Trang 12/25

Code: SC620

Description: Communication Error Between BCU and ADF 1
There was no response from the ADF 100 ms after the ACK signal was sent to the ADF. Three attempts to resend the data failed.
Causes: • Poor connection between the BCU board and the ADF main board
• Interference from external noise on the harness between the BCU and ADF

Code: SC621

Description: Communication Error Between BCU and ADF 2
The machine detected a break signal (LOW) from the line connection between the BCU and ADF
Causes: • Serial line connection unstable
• Harness, connectors between ADF and BCU loose, broken, defective

Code: SC622

Description: Communication Error Between BCU and ADF 3
Software error after improper user operation.
Causes: • Software error
• Cycle the machine off/on

Code: SC625

Description: Communication Error Between BCU and Finisher
The BCU cannot communicate with the finisher properly. here was no response from the ADF 100 ms after the ACK signal was sent to the ADF. Three attempts to resend the data failed.
Causes: • Poor connection between the BCU board and the finisher main board

Code: SC626

Description: Communication Error Between BCU and Finisher
A break signal (LOW) was detected.
Causes: • Poor connection between the BCU board and the finisher main board
• Finisher main board defective
• BCU board defective
• External electrical noise on the interface cable caused the serial line to become unstable

Code: SC630

Description: CSS Communication
Japan Only
Causes:

Code: SC632

Description: Charge Unit Device Error 1
Japan Only
Causes:

Code: SC633

Description: Charge Unit Device Error 2
Japan Only
Causes:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie