Description: Printer Image Setting Error
The settings that are required for image processing using the printer controller are not sent from the IPU
Causes: • Check the harnesses, connectors to the LDB and IPU
• Check the harnesses, connectors between IPU/LDB, LDB/Polygon Mirror Motor PCB
• Update the BCU firmware
• LD defective
• IPU defective
• Polygon mirror motor or polygon mirror motor PCB defective
Description: Polygon Mirror Motor Ready Error
The polygon mirror motor does not reach ready status within 15 s after the copy paper is detected by the registration sensor. (15 s after the write request was issued for the IPU, the FGATE signal remained LOW.)
Causes: • Polygon mirror motor harness, connections to BCU loose, broken, defective
• Polygon mirror motor drive board harness, connector to BCU loose, broken, defective
• Polygon mirror motor defective
• Polygon mirror motor drive board defective
• BCU defective