Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D016 Aficio Pro C900S AG-C1 — Trang 44/85

Code: 677-003

Description: Board Power Error-4. IOB 1: 24V_3B power off error The machine detects 24 V power off from the IOB 1.
Causes: • PSU-EA2 defective • FU107 on the IOB 1 shorted or opened
Remedy: 1. Replace the IOB 1. 2. Check or replace the PSU-EA2.

Code: 677-004

Description: Board Power Error-4. IOB 1: TSNS_VCC power off error The machine detects TSNS_VCC power off from the IOB 1.
Causes: • PSU-EA2 defective • FU104 on the IOB 1 shorted or opened • IOB 1 defective
Remedy: 1. Replace the IOB 1. 2. Check or replace the PSU-EA2.

Code: 681

Description: Communication error: Toner cartridge and RFID
Causes: -001 - • The machine detects a communication error between the toner cartridge and RFID at starting the communication. • The machine cannot recover the communication between the toner cartridge and RFID after the third communication retry. • RFID defective • ASAP I/F disconnected • Incorrect communication due to noise • ID chip defective or not installed in a toner cartridge -001 to -005 - 1. Check the harness connection. 2. Replace the IOB 1. 3. Replace the RFID. -011 to -014 - 1. Check if the toner bottle is correctly installed in the machine. 2. Install the correct toner bottle in the machine. The suffix number of the SC code indicates the following: -011: K, -012: C, -013: M, -014: Y -015 to -018 - Replace the RFID. The suffix number of the SC code indicates the following: -015: K, -016: C, -017: M, -018: Y -019 to -030 - No action except turning off and on is required. The suffix number of the SC code indicates the following: -019/-023/-027: K, -020/-024/-028: C, -021/-025/-029: M, -022/-026/-030: Y -031 to -046 - Replace the toner bottle. The suffix number of the SC code indicates the following: -031/-035/-039/-043: K, -032/-036/-040/-044: C, -033/-037/-041/-045: M, -034/-038/-042/-046: Y -047 to -054 - No action except turning off and on is required. The suffix number of the SC code indicates the following: -047/-051: K, -048/-052: C, -049/-053: M, -050/-054: Y
Remedy:

Code: 683

Description: Toner bottle checking error: Toner cartridge and RFID
Causes: -035 To -045 - The machine detects a communication error between the toner cartridge and RFID at checking the toner bottles even though no toner bottle is installed in the machine. • Incorrect communication due to noise • ID chip defective or not installed in a toner cartridge 1. Check if the ID chip on the toner bottle is installed. 2. Install the correct toner bottle in the machine. The suffix number of the SC code indicates the following: -035/-039/-043: K, -036/-040/-044: C, -037/-041/-045: M, -038/-042/-045: Y
Remedy:

Code: 686

Description: BCU-IPU communication error The BCU detects a communication error with the IPU three times consecutively.
Causes: • BCU defective • IPU defective • I/F cable disconnected or broken
Remedy: 1. Replace the BCU. 2. Replace the IPU. 3. Replace the I/F cable between BCU and IPU.

Code: 701

Description: ADF Pickup Roller Release Malfunction (D016/D097 only) The pick-up roller HP sensor does not activate or de-activate when the pick-up motor turns on.
Causes: • HP sensor connector, harness loose, broken, defective • Pick-up motor connector, harness loose, broken defective • Pick-up roller HP sensor defective • Pick-up motor defective • ADF main control board defective
Remedy: 1. Check the harness connections. 2. Replace the pick-up roller HP sensor. 3. Replace the pick-up motor. 4. Replace the main board of the ADF.

Code: 702

Description: ADF Feed-In Motor Error (D016/D097 only) While the feed motor is operating, the encoder pulse signal is not received within the specified time, or the paper size length encoder signal cannot be detected within the specified time (the encoder is built into the feed-in motor).
Causes: • Feed-in motor connector, harness loose, broken, defective • Paper length sensor connector, harness loose, broken, defective • Feed-in motor defective • Paper length sensor or encoder is defective • ADF main control board defective
Remedy: 1. Check the harness connections. 2. Replace the feed-in motor. 3. Replace the paper length sensor. 4. Replace the main board of the ADF.

Code: 703

Description: ADF Transport Belt Motor Error (D016/D097 only) The encoder pulse signal did not change within 100 ms after 3 attempts to detect any change, causing a "P1" jam error.
Causes: • Transport belt motor defective • Poor connection between the transport motor and ADF main board • ADF main board defective
Remedy: 1. Replace the transport belt motor. 2. Check or replace the harness connections. 3. Replace the transport belt motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie