Description: Stack feed motor error The stack feed HP sensor in the 1000-sheet booklet finisher did not detect "ON" twice (once: jam error) within the prescribed time after the stack feed motor turned on. -or- The stack feed HP sensor did not detect "OFF" twice (once: jam error) for the specified time after the stack feed motor turned on.
Causes: • Motor drive obstructed • Stack feed motor harness loose, broken • Stack feed motor defective
Description: Finisher punch motor error The punch HP sensor did not activate within the prescribed time after the punch motor turned on. The 1st detection issues a jam error, and the 2nd failure issues this SC code.
Causes: • Punch HP sensor harness loose, broken • Punch motor harness loose, broken • Punch motor obstructed • Punch motor defective • Punch HP sensor defective
Description: Folder plate motor error The folder plate in the 1000-sheet booklet finisher moved but was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Folder plate motor drive obstructed • Folder plate HP sensor harness loose, broken • Folder plate motor harness loose, broken • Folder plate motor defective • Folder plate HP sensor defective
Description: Punch movement motor error The punch unit moved but it was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective
Description: Paper position slide motor error The paper position sensor detected movement of the slide but the slide was not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective
Description: Fold unit bottom fence lift motor The fold unit bottom fence lift motor in the 1000-sheet booklet finisher is not operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness loose, broken • Motor drive obstructed • Motor defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.