Description: Wireless LAN board error 2 The board that holds the wireless LAN board can be accessed, but the wireless LAN board (802.11b/Bluetooth) itself cannot be accessed while the machine is operating
Causes: • Wireless LAN board has been removed during machine operation.
Description: USB I/F Error The USB driver is unstable and generated an error. The USB I/F cannot be used. The USB driver can generate three types of errors: RX, CRC, and STALL errors. Only the STALL error can generate this SC code.
Causes: • USB 2.0 disconnected • Controller board defective
Description: Data encryption conversion error A serious error occurred during data encryption.
Causes: 0 A Key acquisition error • Replace the controller board 1 A HDD key setting error • Turn the machine power off/on • If the error reoccurs, replace the controller board 2 A NVRAM read/write error • Replace the NVRAM 30 A NVRAM error • Turn the machine power off/on • If the error reoccurs, replace the controller board 31 A • See SC991
Description: HDD error 1 The hard disk connection is not detected because it is defective or has not been formatted
Causes: • Cable between HDC and HDD loose or defective • HDD power connector loose or defective • HDD not formatted • HDD defective • Replace the controller board