Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D082 MPC7501 V-C3 — Trang 28/44

Code: SC572

Description: Ozone exhaust fan (K) error
The fan of the lower ozone filter box not operating correctly.
Causes: • Fan harness loose, broken, defective • Fan overload due to physical obstruction • Fan motor defective

Code: SC573

Description: Ozone intake fan error
The ozone filter intake fan not operating correctly.
Causes: • Fan harness loose, broken, defective • Fan overload due to physical obstruction • Fan motor defective

Code: SC574

Description: Y thermistor error The thermistor near the Y PCU has short circuited or otherwise not operating correctly.
Causes: • Harness loose, broken, defective • Thermistor defective

Code: SC585

Description: Double-feed detection sensor error
The ADC output value of the double-feed sensor LED was not within range (2 to 250).
Causes: • Sensors are covered with paper dust or other matter and require cleaning • Sensor harness connection loose, broken, defective • There is an obstruction between the emitter/receptor sensor pair. • Sensors defective

Code: SC599

Description: Tray 1 lift motor error
An error was detected in the operation of the lift motor for Tray 1 (tandem tray).
Causes: • Motor harness loose, broken, defective • Motor overload due to an obstruction • Motor defective

Code: SC620

Description: ARDF communication error
A BREAK signal occurs after the machine detects the ARDF, or a communication timeout occurs.
Causes: • ARDF disconnected • VBCU board harness disconnected, defective • VBCU board defective • Spurious noise from the power supply line • ARDF defective

Code: SC621

Description: Mailbox-to-Finisher communication error
Communication between the mailbox and finisher is interrupted. An ACK/NCK signal was not received within 100 ms after a data frame is sent and 3 retries failed.
Causes: • Connection cable between mailbox and finisher disconnected, defective • Finisher main board defective • VBCU defective • PSU defective

Code: SC622

Description: PFB communication error
Communication between the VBCU and PFB was interrupted. (Communication status is monitored at 30 ms intervals.)
Causes: • Connection cable between the VBCU and PFB is disconnected, defective • VBCU defective • PFB defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie