Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D082 MPC7501 V-C3 — Trang 31/44

Code: SC726

Description: Shift jogger motor 1 error (D373/D374, B830)
The sides fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code
Causes: • Shift jogger motor disconnected, defective • Shift jogger motor overloaded due to obstruction • Shift jogger HP sensor disconnected, defective

Code: SC727

Description: Shift jogger motor 2 error (D373/D374)
The side fences do not retract within the prescribed time after the shift jogger motor switches on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Motor harness disconnected, loose, defective • Motor defective • Motor overload • HP defective

Code: SC728

Description: Shift jogger retraction motor error (D373/D374)
The side fences do not retract within the prescribed time after the retraction motor switches on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Motor harness disconnected, loose, defective • Motor defective • Motor overload • HP defective

Code: SC730

Description: Finisher Tray 1 shift motor error (B830)
The shift roller HP sensor of the upper tray does not activate within the prescribed time after the shift tray starts to move toward or away from the home position. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Shift tray HP sensor of the upper tray disconnected, defective • Shift tray motor of the upper tray is disconnected, defective • Shift tray motor of the upper tray overloaded due to obstruction

Code: SC731

Description: Upper Transport Motor Error (Proof Tray): B830
No encoder pulse signal is detected for the upper transport motor within 600 ms. The 1st failure causes this SC code.
Causes: • Upper transport motor disconnected, defective • Finisher connection to upper transport motor loose, defective • Upper transport motor blocked by an obstruction • Upper transport motor defective • Finisher main board defective

Code: SC732

Description: Shift Tray Exit Motor: 3K Finisher B830
The shift tray exit motor is not operating.
Causes: • Motor harness loose, broken, defective • Motor is blocked by an obstruction • Motor defective • Finisher main control board defective

Code: SC733

Description: Stapler Exit Motor: B830
The stapler exit motor is not operating.
Causes: • Motor harness loose, broken, defective • Motor is blocked by an obstruction • Motor defective • Finisher main control board defective

Code: SC734

Description: Upper Tray Junction Gate Motor: 3K Finisher B830
The upper tray junction gate HP sensor did not detect the gate at the home position within 200 ms after two attempts. -or- The HP sensor twice detected the gate at the home position for more than 200 ms after it was supposed to open.
Causes: • Junction gate did not arrive at the home position within the specified time • Junction gate did not leave the home position within the specified time
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie