Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D118 MPC305SP GR-C1 — Trang 17/21

Code: 850

Description: Network I/F error
Inoperative
Causes:
Remedy: 1. Turn the main switch off and on.

Code: 853

Description: Bluetooth device connection error
The Bluetooth interface unit was installed while the machine was turned on.
Causes:
Remedy: 1. Turn off the main power switch, and then confirm that the Bluetooth interface unit was installed correctly. Then turn on the main power switch again.

Code: 854

Description: Bluetooth device connection error
The Bluetooth interface unit was removed while the machine was turned on.
Causes:
Remedy: 1. Turn off the main power switch, and then confirm that the Bluetooth interface unit was installed correctly. Then turn on the main power switch again.

Code: 855

Description: Hardware Problem:wireless LAN board
The wireless LAN board can be accessed, but an error was detected.
Causes: Loose connection. Defective wireless LAN card.
Remedy: 1. Make sure that the Wireless LAN is connected. 2. Replace the wireless LAN card.

Code: 858

Description: HDD Encryption unit error 1
A serious error occurs when data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -00 A Encryption key acquisition error: The controller fails to get a new encryption key. • Defective controller board 1. Replace the controller board -01 A Encryption key setting for HDD error: The controller fails to copy a new encryption key to the HDD. • Defective SATA chip on the controller board 1. Replace the controller board. -02 A NVRAM data encryption error 1: An error occurs while the NVRAM data is encrypted. • Defective NVRAM on the controller board 1. Replace the NVRAM. -30 A NVRAM data encryption error 2: An error occurs before the NVRAM data is encrypted. • Defective controller board 1. Replace the controller board. -31 A Other error: A serious error occurs while the data is encrypted. • Same as SC991
Remedy:

Code: 859

Description: HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key with the HDD encryption unit.
Causes: -08 B HDD check error: The HDD is not correctly installed. • No HDD installed • Unformatted HDD • The encryption key on the controller is different from the one on the HDD 1. Install the HDD correctly. 2. Initialize the HDD. -09 B Power failure during the data encryption: The data encryption (NVRAM and HDD) has not been completed. • Power failure during the data encryption 1. Initialize the HDD -10 B Data read/write error: The DMAC error is detected twice or more. Same as SC863
Remedy:

Code: 860

Description: HDD startup error at main power on
HDD is connected but a driver error is detected. The driver does not respond to the HDD within 30 s.
Causes: • HDD is not initialized • Label data is corrupted • Defective HDD
Remedy: 1. Initialize the HDD with SP5832-001.

Code: 862

Description: Bad sector number error
The number of bad sectors in the HDD (image data area) goes over 101.
Causes: Defective HDD
Remedy: 1. Format the HDD with SP4911-002. 2. Replace the HDD
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie