Description: Transport motor error (D610) A pulse signal from the transport motor could not be detected within the prescribed time. The first detection triggers a jam code, and the second detection triggers this SC.
Causes: • Motor overload due to an obstruction • Motor harness connector loose, broken, defective • Motor defective
Description: Finisher jogger motor error (D610) • The finisher jogger HP sensor remains de-activated for more 1,000 pulses when returning to home position. • The finisher jogger HP sensor remains activated for more than 1,000 pulses when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger mechanism overload • Jogger motor defective (not rotating) • Finisher main board defective • Harness disconnected or defective
Description: Finisher staple hammer motor error (D610) The staple hammer motor did not return to the home position within the prescribed time (340 ms).
Causes: • Staple hammer HP sensor loose, broken, defective • Electrical overload on the stapler drive PCB elect • Staple hammer motor defective • Finisher main board defective
Description: Stack Plate Motor Error 1: Front Motor(D610) The stack plate HP sensor (front) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Front stack plate HP sensor harness loose, broken, defective • Front stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective
Description: Stack Plate Motor Error 2: Center Motor (D610) The stack plate HP sensor (center) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Center stack plate HP sensor harness loose, broken, defective • Center stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective
Description: Stack Plate Motor Error 3: Rear Motor (D610) The stack plate HP sensor (rear) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Rear stack plate HP sensor harness loose, broken, defective • Rear stack plate HP sensor defective If the motor is not operating: • Motor blocked by an obstruction • Motor harness loose, broken, defective • Motor defective • Booklet finisher main board defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.