Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D131 MP6002 — Trang 16/33

Code: 720-01

Description: Downstream finisher communication error No response signal was received from the downstream finisher (D611/D612) after 3 attempts
Causes: • Finisher I/F cable loose, broken defective • Finisher control board defective

Code: 720-24

Description: Exit guide motor (D611/D612) The status of the exit guide sensor did not change at the prescribed time during operation of the exit guide.
Causes: • Exit guide open sensor loose, broken, defective. • Exit guide motor defective • Finisher main board defective

Code: 720-25

Description: Punch motor error (D611/D612) After the punch operation, the punch HP sensor did not detect the punch unit at the home position.
Causes: • Punch motor connection loose, broken, defective. • Punch overload (blocked by obstruction) • Home position sensor connection loose, broken, defective • HP sensor defective

Code: 720-30

Description: Finisher jogger motor error (D611/D612) • The finisher jogger HP sensor remains de-activated for more 1,000 pulses when returning to home position. • The finisher jogger HP sensor remains activated for more than 1,000 pulses when moving away from home position
Causes: • Jogger HP sensor defective • Jogger mechanism overload • Jogger motor defective (not rotating) • Finisher main board defective • Harness disconnected or defective

Code: 720-41

Description: Feed-Out Belt Motor Error (D611/D612) The stack feed-out belt HP sensor does not activate within the specified time after the stack feed-out belt motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating • Stack feed-out HP sensor harness loose, broken, defective • Stack feed-out HP sensor defective If the motor is not operating: • Feed-out motor blocked by an obstruction • Feed-out motor harness loose, broken, defective • Feed-out motor defective • Booklet finisher main board defective

Code: 720-42

Description: Finisher stapler movement motor error (D611/D612) The stapler HP sensor is not activated within the specified time after the stapler motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler movement motor disconnected, defective • Stapler movement motor overloaded due to obstruction • Stapler HP sensor disconnected, defective

Code: 720-43

Description: Finisher corner stapler rotation motor error (D611/D612) The stapler does not return to its home position within the specified time after stapling. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler rotation motor disconnected, defective • Stapler rotation motor overloaded due to obstruction • Stapler rotation HP sensor disconnected, defective

Code: 720-44

Description: Finisher corner stapler motor error (D611/D612) The stapler motor does not switch off within the prescribed time after operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Staple jam • Number of sheets in the stack exceeds the limit for stapling • Stapler motor disconnected, defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie