Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh D132 MP7502 — Trang 26/33

Code: 840

Description: EEPROM access error A read error occurred during I/O processing. The failure of the 3rd attempt to read caused this error.
Causes: • Defective EEPROM

Code: 841

Description: EEPROM read error Mirrored data of the EEPROM is different from the original data in EEPROM.
Causes: • Data in the EEPROM was overwritten for some reason.

Code: 842

Description: Nand-Flash updating verification error A write error for the module written in Nand-Flash occurred while the remote ROM and ROM were being updated.
Causes: • Damaged Nand-Flash

Code: 850

Description: Network I/F error Network not operating.
Causes: Cycle the machine off/on

Code: 851

Description: IEEE 1394 I/F error Driver setting incorrect and cannot be used by the 1394 I/F.
Causes: • NIB (PHY), LINK module defective; change the Interface Board • Controller board defective

Code: 853

Description: Wireless LAN Error 1 During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth).
Causes: • Wireless LAN card missing (was removed)

Code: 854

Description: Wireless LAN Error 2 The board that holds the wireless LAN card can be accessed, but the wireless LAN card (802.11b/Bluetooth) itself could not be accessed while the machine was operating.
Causes: • Wireless LAN card has been removed.

Code: 855

Description: Hardware Problem:wireless LAN board The wireless LAN board can be accessed, but an error was detected.
Causes: • Loose connection • Defective wireless LAN board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie