Description: Pressure roller thermistor error The temperature measured by the pressure roller thermistor does not reach 0°C for 120 seconds.
Causes: • Loose connection of pressure roller thermistor • Defective pressure roller thermistor • Related SC code: SC 541, SC561
Remedy: 1. Do SP5810 to cancel the SC fusing code. 2. Check that the pressure roller thermistor is firmly connected. 3. Replace the pressure roller thermistor.
Description: Pressure roller warm-up error 2 • The pressure roller temperature does not reach the ready temperature for 1600 seconds after the heating lamp on. • The pressure roller temperature does not reach 100°C for 700 seconds after the pressure roller lamp on.
Remedy: 1. Do SP5810 to cancel the SC fusing code. 2. Check if the pressure roller thermistor is firmly connected. 3. Replace the pressure roller thermistor.
Description: Pressure roller fusing lamp remains on After hot roller reaches warm-up temperature, the pressure roller fusing lamp remained for 360 sec. while the hot roller is not rotating.
Causes: Thermistor damaged, or out of position
Remedy: 1. Do SP5810 to cancel the SC fusing code. 2. Replace the pressure roller thermistor.
Description: Zero cross frequency error The detection error occurs twice or more in the 10 zero cross signal detections. This error is defined when the detected zero cross signal is less than 44.
Description: Consecutive fusing jam The paper jam counter for the fusing unit reaches 3 times. The paper jam counter is cleared if the paper is fed correctly. This SC is activated only when SP1159-001 is set to "1" (default "0").
Causes: • Paper jam in the fusing unit.
Remedy: Remove the paper that is jammed in the fusing unit. Then make sure that the fusing unit is clean and has no obstacles in the paper feed path.
Description: Heating roller thermistor error (end) The temperature measured by the heating roller thermistor does not reach 0°C after 45 sec. and remains over this temperature for 10 readings.
Causes: • Loose connection of the heating roller thermistor • Defective heating roller thermistor
Remedy: Replace the heating roller thermistor.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.