Description: Fusing jam error: 3 counts
At the fusing exit sensor the paper jam is detected late for three pulse counts (lag error) when SP1913-001 is set to "1: Yes".
Causes: • Obstacle in the paper transport path • Fusing unit installed incorrectly • Fusing unit defective
Description: EEPROM error
The EEPROM error is detected at reading the prefix of the EEPROM address after power-on or recovery from the energy saver mode.
Causes: • EEPROM not installed or incorrectly installed • EEPROM defective
Description: Ready notification error of image data transmission
The controller does not send a ready notification of image data transmission after a sheet of paper has stopped at the registration roller.
Causes: • Controller board defective • Communication error
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.