Description: Fusing temperature warm-up error
The fusing temperature does not increase by 7°C for 10 seconds. The fusing temperature does not reach more than 135°C for 24 seconds after the main switch is turned on.
Causes: • Thermistor defective or deformed • Fusing lamp open • Fusing thermostat open
Description: Zero cross signal malfunction
Zero cross signals are already detected for 0.15 seconds before the fusing relay-on. Zero cross signals are not detected for 3 seconds or the machine cannot detect a frequency.
Causes: • Power supply board defective • Unstable main power supply condition
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.