Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M047 SP6330N Kr-P2 — Trang 7/8

Code: 876

Description: Log Data Error
Causes:

Code: 877

Description: HDD Data Overwrite Security SD card error
Causes: Defective SD card (M352) SD card (M352) not installed • Replace the NVRAM and then install the new SD card (M352). • Check and reinstall the SD card (M352).

Code: 878

Description: TPM system authentication error
Causes: Incorrect updating for the system firmware Defective flash ROM on the controller board • Replace the controller board.

Code: 900

Description: Controller counter errorn error
Causes: • Replace the NVRAM if the error is frequent.

Code: 920

Description: Printer application error error
Causes: Defective software Unexpected hardware resource (e.g., memory shortage) • Software defective; switch off/on, or change the controller firmware if the problem is not solved • Insufficient memory

Code: 921

Description: Printer font error
Causes: A necessary font is not found in the SD card. The SD card data is corrupted. • Check that the SD card has the correct data.

Code: 990

Description: Software performance error
Causes: • Software defective; reboot the machine • Internal parameter incorrect • Insufficient working memory • When this SC occurs, the file name, address, and data will be stored in NVRAM. Note the above data and the situation in which this SC occurs. Then report the data and conditions to your technical control center.

Code: 991

Description: Software continuity error error
Causes: • Software bug; reboot the machine • Internal parameter incorrect • Insufficient working memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie