Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M158 SP4510DN Gim-P1c

Code: SC101

Description: Exposure Lamp Error
Causes: The scanner has scanned the white plate, but cannot detect the certain white level. • Defective exposure lamp • Defective exposure lamp stabilizer • Defective power source harness • Defective signal harness • High-voltage cable leak • Defective darkness starting characteristic
Remedy: Turn the main power OFF and then ON.

Code: SC120

Description: Scanner home position error 1
Causes: The scanner home position sensor does not detect the scanner leaving the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor
Remedy: Turn the main power OFF and then ON.

Code: SC121

Description: Scanner home position error 2
Causes: The scanner home position sensor does not detect the scanner coming back to the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor
Remedy: Turn the main power OFF and then ON.

Code: SC141

Description: Black level correction error
Causes: The automatic adjustment has failed to correct the black level to the permissible range. • Defective SBU board • Defective harness
Remedy: Turn the main power OFF and then ON.

Code: SC142

Description: White level correction error
Causes: The automatic adjustment has failed to correct the white level to the permissible range. • Defective scanner drive • Defective optical section • Defective SBU board • Defective harness
Remedy: Turn the main power OFF and then ON.

Code: SC144

Description: SBU Communication Error
Causes: Cannot correctly establish communication with the SBU. • Defective harness • Defective destination device (e.g., BICU, etc) • Defective SBU
Remedy: Reboot the machine.

Code: SC161-01

Description: IPU error (LSYNC error)
Causes: When turning the power on or when recovering from energy saving mode, the machine performs a BICU self-diagnostic test. If it detects an error, it reports an IPU (LSUNC) error. • Defective IPU or BICU (or bad connection between the ASIC and the LEO, LSYNC Abnormal, etc) • Faulty cable connection between the SBU and IPU (or BICU).
Remedy: • Check the connection between SBU and IPU (BICU) • Replace the IPU (BICU)

Code: SC161-02

Description: IPU error (RI response error)
Causes: Detecting an error on access to the RI. Defective IPU (BICU, ICTL) or RI abnormal performance, etc
Remedy: Replace the IPU (BICU)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie