Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh M172 SP3600SF Gim-MF1a

Code: SC101-00

Description: Exposure Lamp Error
Causes: The scanner has scanned the white plate, but cannot detect the certain white level. • Defective exposure lamp • Defective exposure lamp stabilizer • Defective power source harness • Defective signal harness • High-voltage cable leak • Defective darkness starting characteristic
Remedy: Turn the main power OFF and then ON.

Code: SC101-01

Description: Exposure Lamp Error
Causes: The scanner has scanned the white plate, but cannot detect the certain white level. • Defective exposure lamp • Defective exposure lamp stabilizer • Defective power source harness • Defective signal harness • High-voltage cable leak • Defective darkness starting characteristic
Remedy: Turn the main power OFF and then ON.

Code: SC120

Description: Scanner home position error 1
Causes: The scanner home position sensor does not detect the scanner leaving the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor
Remedy: Turn the main power OFF and then ON.

Code: SC121

Description: Scanner home position error 2
Causes: The scanner home position sensor does not detect the scanner coming back to the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor
Remedy: Turn the main power OFF and then ON.

Code: SC230-00

Description: FGATE*1 : Does not turn ON. (*1)FGATE: Signals used between the controller and the engine in order to send the information about the sub scan length of the page to be printed.
Causes: GPIO*2 has not been asserted, although the specified time (200 ms) elapsed after setting JOB to be started and reaching the FGAT assert time. • Engine board defective • ASIC defective • Controller board defective • Harness disconnection (*2)GPIO: A type of input/output terminal
Remedy: Turn the main power OFF and then ON.

Code: SC231-00

Description: FGATE*1: Does not turn OFF. (*1)FGATE: Signals used between the controller and the engine in order to send the information about the sub scan length of the page to be printed.
Causes: GPIO*2 has not been negated, although the specified time (200 ms) elapsed after detecting GPIO*assert and then reaching the expected FGATE negate time. • Engine board defective • Write ASIC defective • Controller board defective • Harness disconnection (*2)GPIO: A type of input/output terminal
Remedy: Turn the main power OFF and then ON.

Code: SC270-00

Description: Write ASIC communication error
Causes: The unique ID of the write ASIC was not read normally. • Engine board defective • Write ASIC defective
Remedy: • Turn the main power OFF and then ON. • Engine Board

Code: SC277-00

Description: LEDA communication error
Causes: The head type data was read three times in succession (277-00) • Defective ASIC • Defective LEDA (277-10) • LEDA power source error
Remedy: • Turn the main power OFF and then ON. • Replace the LED head
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie