Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh ML325D — Trang 3/10

Code: 390

Description: TD sensor error
The TD sensor outputs less than 0.2 V or more than 4.0 V 10 times consecutively during copying.
Causes: • TD sensor abnormal • Poor connection of the PCU

Code: 391

Description: Development bias leak
A development bias leak signal is detected.
Causes: • Poor connection of the PCU • High voltage supply board defective

Code: 392

Description: TD sensor initial setting error
TD sensor initial setting is not performed correctly.
Causes: • ID sensor defective • No developer • Drum does not turn • Development roller does not turn • Poor connection of the PCU • The voltage is not applied to charge roller

Code: 402

Description: Transfer roller leak error 2
A current leak signal for the transfer roller is detected. A current feedback signal for the transfer roller is not detected.
Causes: • High voltage supply board defective • Poor connection of the PCU • Transfer/separation unit set incorrectly • Transfer roller damaged

Code: 411

Description: Discharge leak error
High-voltage power supply board detects the 50% or more of PWM duty for 0.2 seconds.
Causes: • Discharge plate defective • High-voltage power supply board defective

Code: 490

Description: Toner supply motor: Excess current error
The machine detects the current of 1A or more supplied to the toner supply motor for 0.2 seconds.
Causes: • Toner supply motor short circuit

Code: 500

Description: Main motor lock
A main motor lock signal is not detected for more than 7 consecutive checks (700 ms) after the main motor starts to rotate, or the lock signal is not detected for more than 7 consecutive checks during rotation after the last signal.
Causes: • Too much load on the drive mechanism • Main motor defective

Code: 501

Description: Tray 1 lift motor malfunction
The paper lift sensor fails to activate twice continuously after the tray lift motor has been on for 18 seconds.
Causes: • Paper lift sensor defective • Tray lift motor defective • Too much load on the drive mechanism • Poor tray lift motor connection
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie