Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh ML325D — Trang 5/10

Code: 545

Description: Fusing lamp overheat error (center)
After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 12 consecutive seconds.
Causes: • Fusing thermistor defective or out of position • Power supply board defective

Code: 546

Description: Unstable fusing temperature (center)
The fusing temperature varies 50° C or more within 1 second, and this occurs 2 consecutive times.
Causes: • Thermistor defective or out of position • Power supply unit defective

Code: 547

Description: Zero cross signal malfunction
The relay terminal of the fusing unit is melted, zero cross signals are not detected within 3 seconds after the main power switch is turned on, or detected zero cross signals are 44 times or less.
Causes: • Discharge plate defective • High-voltage supply board defective • BICU defective

Code: 551

Description: Fusing thermistor open (rear)
The fusing temperature detected by the thermistor is below 71°C and is not corrected after the main power switch is turned on.
Causes: • Fusing thermistor defective or out of position • Power supply board defective • Loose connectors

Code: 552

Description: Fusing temperature warm-up error (rear)
The fusing temperature rises less than 7 degrees in 2 seconds, and this continues 5 times consecutively. The fusing temperature is not detected in 25 or 35 seconds.
Causes: • Fusing thermistor defective or out of position • Fusing lamp open • Power supply board defective

Code: 553

Description: Fusing overheat error (rear)
The fusing temperature is over 230°C for 1 second (detected by the thermistor).
Causes: • Fusing thermistor defective • Power supply board defective

Code: 555

Description: Fusing lamp overheat error (rear)
After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
Causes: • Fusing thermistor defective or out of position • Power supply board defective

Code: 556

Description: Unstable fusing temperature (rear)
The fusing temperature varies 50° C or more within 1 second, and this occurs 2 consecutive times.
Causes: • Thermistor defective or out of position • Power supply unit defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie