Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh ML325D — Trang 8/10

Code: 762

Description: ARDF gate abnormal 3
The FGATE signal is not terminated by the ARDF within 60 seconds after the ARDF starts feeding.
Causes: • ARDF connector defective • SBU board defective

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation

Code: 793

Description: Front jogger motor error
• The machine does not detect that the front jogger HP sensor is OFF for 40 ms after the front jogger fence moved. • The machine does not detect that the front jogger fence HP sensor is ON for 830 ms after the front jogger fence returned to its home position.
Causes: • Defective front jogger motor • Disconnected connector • Overload to front jogger motor • Defective front jogger fence HP sensor

Code: 794

Description: Rear jogger motor error
• The machine does not detect that the rear jogger HP sensor is OFF for 40 ms after the rear jogger fence moved. • The machine does not detect that the rear jogger fence HP sensor is ON for 830 ms after the rear jogger fence returned to its home position.
Causes: • Defective rear jogger motor • Disconnected connector • Overload to rear jogger motor • Defective rear jogger fence HP sensor

Code: 795

Description: Pick-up roller HP sensor error
• The pick-up roller HP sensor does not turn off for 650 msec after the pick-up roller has lifted down. • The pick-up roller HP sensor does not turn on for 650 msec after the pick-up roller has lifted up.
Causes: • Disconnected harness • Defective pick-up roller contact motor • Defective pick-up roller HP sensor

Code: 796

Description: Transport belt solenoid error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. • The machine does not detect that the belt lift sensor is ON at initializing after the paper transport motor has rotated.
Causes: • Disconnected harness • Defective paper transport motor • Belt lift sensor defective

Code: 797

Description: EEPROM data error
The job data is not transferred to the EEPROM.
Causes: • Defective EEPROM on the control board

Code: 901

Description: Mechanical total counter
The mechanical total counter does not work properly.
Causes: • Mechanical total counter defective • BICU defective • Disconnected mechanical total counter
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie