• Code: 405 S10
• Description: Feed tray 2 elevator motor lock (Detailed No. 2: overcurrent) Overcurrent was detected in the FL feed tray 2 elevator motor. * This error can be cleared by opening feed tray 2.

• Code: 406 S10
• Description: Feed tray 1 paper width adjustment parameter error The correction value for the feed tray 1 paper width VR falls outside the specified range. * This error can be cleared by opening the feed tray or opening the cover of the vertical transfer unit.

• Code: 407 S10
• Description: Feed tray 2 paper width adjustment parameter error The correction value for the feed tray 2 paper width VR falls outside the specified range. * This error can be cleared by opening the feed tray or opening the cover of the vertical transfer unit.

• Code: 408 S10
• Description: Multi-tray paper feed multiple feed sensor light emitting intensity error The multiple feed sensor light emitting intensity falls outside the specified range. * This error can be cleared by opening the feed tray or opening the cover of the vertical transfer unit.

• Code: 409 S10
• Description: Multi-tray paper feed EEPROM error Data could not be written correctly to the EEPROM. Or an EEPROM checksum error occurred. * This error can be cleared by opening the feed tray or opening the cover of the vertical transfer unit.

• Code: 410 Z14
• Description: Jam release SW check The jam release cover safety SW is OFF. * Since the jam release safety SW is shared with the main unit left front cover, this error is seldom displayed.

• Code: 411 Z08
• Description: Vertical transfer unit door not set The door of the FL vertical transfer unit is open.

• Code: 412 X15
• Description: Feed tray 1 multiple feed (transmission light intensity detection) A multiple feed occurred during paper transport.