• Code: 208 S96
• Description: Blower fan 4 disconnected/not connected The connector for blower fan 4 is disconnected, or there is a break in the winding.

• Code: 209 X07
• Description: Duplex re-feed unit failure The registration sensor fails to activate when the specified number of clock inputs is issued from the belt encoder after paper is re-fed for duplex printing.

• Code: 210 X02
• Description: Registration sensor paper end exiting delay The trailing edge of the paper sheet does not pass the registration sensor within the specified interval based on the belt encoder pulse count.

• Code: 211 X02
• Description: Top edge sensor paper leading edge arrival delay The leading edge of the paper sheet does not reach the top edge sensor (sensor does not detect the presence of paper) within the specified interval based on the belt encoder pulse count.

• Code: 212 X02
• Description: Top edge sensor paper end exiting delay The trailing edge of the paper sheet does not pass the top edge sensor (sensor detecting the presence of paper) within the specified interval based on the belt encoder pulse count.

• Code: 213 X02
• Description: Exit sensor paper leading edge arrival delay The leading edge of the paper sheet does not reach the exit sensor (sensor does not detect the presence of paper) within the specified interval based on the belt encoder pulse count.

• Code: 214 X04
• Description: Flipper sensor paper leading edge arrival delay The leading edge of the paper sheet does not reach the flipper sensor (sensor does not detect the presence of paper) within the specified interval based on the belt encoder pulse count.

• Code: 215 X04
• Description: Flipper sensor paper end exiting delay The trailing edge of the paper sheet does not pass the flipper sensor (sensor detecting the presence of paper) within the specified interval based on the belt encoder pulse count.