Description: Paper jam inside of machine 1. At Power On, the paper is jamming at Regi sensor or Feed sensor. 2. At printing, the paper is detecting at Regi sensor or Feed sensor continuously. 3. At printing, the paper is not detected at exit sensor within a predetermined time.
Causes: 1. Feed sensor or Regi Sensor is defective. 2. Exit sensor is defective. 3. Feed Clutch is defective. 4. Regi Clutch is defective.
Description: 1. At Power On, if the Fuser Exit Sensor and/or Reverse Sensor detects paper. 2. At Printing, Fuser Exit sensor and Reverse Sensor is not on within a predetermined time after paper moves into the Reverse path.
Causes: 1. Check the Fuser Exit Sensor, Reverse Sensor Harness and Connector. 2. Check if the UI message is changed in the Fuser Exit Sensor and the Reverse Sensor operation (EDC Mode). 3. Check the Reverse Motor and Fuser Exit Motor. (EDC Mode).
Display: Output bin Full Output bin Full. Remove printed paper
Description: When the tray limit is reached, the out-bin full sensor is on for 600ms.
Causes: 1. Check the Out-Bin Full Sensor. 2. Check if the UI message is changed by the Out-Bin Full Sensor operation. 3. Check the Out-Bin Full Sensor Harness and Connector.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.