Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung CLX6220FX — Trang 4/4

Code: 18-000, 18-001

Display: Fax memory is almost full. Fax memory is full. Print or remove received fax Job Too many faxes are queued to be sent. Wait or remove queued job. Too many faxes are received. Print or remove job
Description: Cannot execute the Fax function.
Causes: There is not enough fax memory.

Code: 18-002, 18-003

Display: Fax memory is almost full. Fax memory is full. Print or remove received fax Job Too many faxes are queued to be sent. Wait or remove queued job. Too many faxes are received. Print or remove job
Description: Cannot execute the Fax function.
Causes: There is not enough fax memory.

Code: 21-002

Display: Paper Empty in tray1 Paper is empty in tray1. Load paper
Description: There is the paper in tray1 but error message is displayed.
Causes: 1. Tray1 empty sensor harness is not connected properly. . 2. Empty Sensor is defective.

Code: 21-003

Display: Tray 1 cassette is pulled out. Insert it properly
Description: Tray1 cassette is inserted in machine but error message is displayed.
Causes: 1. The connector of the Tray1 Home Position Sensor is not connected properly. 2. Tray1 Home Position Sensor is defective.

Code: 21-010

Display: Paper is empty in MP tray. Load paper
Description: There is the paper in MP tray but error message is displayed.
Causes: 1. MP Paper Empty Sensor harness is not connected properly. 2. MP Paper Empty Sensor is defective.

Code: 21-018

Display: Paper Empty in tray2 Paper is empty in tray2. Load paper
Description: There is the paper in tray2 but error message is displayed.
Causes: 1. Tray2 empty sensor harness is not connected properly. . 2. Empty Sensor is defective.

Code: 21-019

Display: Tray2 cassette is pulled out. Insert it properly
Description: Tray2 cassette is inserted in machine but error message is displayed.
Causes: 1. The connector of the Tray2 Home Position Sensor is not connected properly. 2. Tray2 Home Position Sensor is defective.

Code: 28-001, 28-002, 28-003

Display: Transfer belt is not installed. Install it. Transfer belt is not compatible for this machine. Check user’s guide.
Description: The red LED is turning on and the machine does not operate.
Causes: The transfer belt unit is installed in the machine but the machine could not read the information from the CRUM. CRUM information is different from machine.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie