• Code: 08-000, 08-001
• Display: Original paper Jam Original paper jam inside of scanner. Remove Jam
• Description: The lead edge of the document failed to actuate the Registration sensor within the predetermined time after initialization of Paper Pick up.
• Causes: 1. Pick up roller is defective. 2. Scan sensor or actuator is defective. 3. Document paper path is contaminated.

• Code: 08-002, 08-006
• Display: Original paper jam inside of scanner
• Description: The leadedge of the document has not reached to scan sensor after being sensed by the regi sensor.
• Causes: 1. Gate sensor or actuator is defective. 2. Document paper path is contaminated. 3. WHITE BAR SHEET is not attached properly. 4. WHITE BAR is defective.

• Code: 08-003, 08-010
• Display: Original paper Jam Original paper jam inside of scanner. Remove Jam
• Description: At duplex scan, the leadedge of the document has not reached to the duplex sensor after scanning the front side.
• Causes: 1. Duplex sensor or actuator is defective. 2. There is the contamination on paper path or a defective assembly. 3. The Duplex Gate does not work properly. 4. Duplex motor is defective.

• Code: 08-004, 08-006
• Display: Original paper Jam Original paper jam inside of scanner. Remove Jam
• Description: The bottom edge of the document failed to pass the scan sensor after the leadedge of the document has reached to the duplex sensor and scan sensor.
• Causes: 1. Scan sensor or actuator is defective. 2. There is the contamination on paper path or a defective assembly.

• Code: 08-008
• Display: Scanner door Open Door of scanner is open. Close it
• Description: DADF door is opened.
• Causes: The cover open sensor is defective.

• Code: 11-003
• Display: Scanner locked Scanner locking switch is locked. Release it
• Description: Scanner locking switch is locked or Home checking is abnormal.
• Causes: Scanner locking switch is locked.

• Code: 12-000, 12-001
• Display: Paper mismatch Tray1/2 Load [A4] [Plain] Continue Cancel x
• Description: The paper in tray1 and/or tray 2 does not match the size selected.
• Causes: 1. Check that the size selected matches the copy paper in the tray selected. 2. Check the harness and connector of the Trya1/2 Size Sensor. 3. Tray1/2 Size Sensors and it operation.

• Code: 12-004
• Display: Paper mismatch MP. Load [A4] [Plain] Continue Cancel x
• Description: The paper in Manual Tray does not match the size selected.
• Causes: 1. Check that the size selected matches the copy paper in the Manual Tray. 2. Check the harness and connector of the MP Size Sensor. 3. MP Size Sensor is defective.