Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung CLX9251NA — Trang 14/17

Code: S1-1411, S1-1413

Display: Video System Failure #S1-1411: Turn off then on.
Description: The SPGPv4 chip on main board is not detected.
Remedy: 1) Turn the machine off then on. 2) If the problem persistss, turn the machine off again. 3) Remove the rear cover. 4) Replace the main board(JC92-02429A). NOTE Insert the MSOK to the new main board. 5) Assemble the rear cover. Turn the machine on.

Code: S1-2111

Display: Video System Failure #S1-2111: Turn off then on.
Description: The machine can’t detect memory during booting.
Remedy: 1) Turn the machine off then on. 2) If the problem persistss, turn the machine off again. 3) Remove the rear cover. 4) Replace the main board(JC92-02429A). NOTE Insert the MSOK to the new main board. 5) Assemble the rear cover. Turn the machine on.

Code: S1-2411, S1-2421, S1-2422

Display: HDD System Failure #: Turn off then on.
Description: Hard Disk is not installed in the machine. / Hard Disk is defective.
Remedy: 1) Check if the HDD is installed correctly. a) Remove the rear cover. b) Check if the HDD cable is connected correctly. 2) If the problem persistss, replace the HDD(JC59-00035A).

Code: S1-2433, S1-2443, S1-2444, S1-2445, S1-2446, S1-2447, S1-2448, S1-2449

Display: HDD System Failure #: Turn off then on.
Description: HDD partition is full or corrupted.
Remedy: 1) Enter SVC mode. Select “System Recovery” in Service Function menu. 2) Execute hard disk format and firmware re-installation. 3) If the problem persistss, replace the HDD(JC59-00035A).

Code: S1-2434, S1-2435, S1-2436, S1-2437, S1-2438, S1-2439

Display: HDD Error #. Check users guide.
Description: HDD partition or memory is full.
Remedy: NOTE • S1-2434 : Addresses in Address book / User data in User profile • S1-2435 : Documents in Document box / Jobs in Secure job list / Fonts / Forms • S1-2436 : System Logs • S1-2437/3438/3439 : Printing Error / No Paper in Tray 1) Enter SVC mode. Select “Hard Disk Maintenance” in Service Function menu. 2) Execute hard disk format. 3) If the problem persistss, replace the HDD(JC59-00035A).

Code: S1-2510, S1-2511

Display: MSOK System Failure #: Turn off then on.
Description: MSOK is not installed properly. / MSOK is defective.
Remedy: 1) Remove the rear cover. 2) Check if the MSOK is inserted correctly. Remove and reinstall it. 3) If the problem persists, replace the main board(JC92-02429A).

Code: S1-4111

Display: Video System Failure #S1-4111: Turn off then on.
Description: The main board can’t send the data through the network channel.
Remedy: 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02429A).

Code: S1-4311

Display: Video System Failure #S1-4311: Turn off then on.
Description: The USB device chip is defective.
Remedy: 1) Turn the machine off then on. 2) If the problem persistss, turn the machine off again. 3) Remove and disassemble the OPE unit. 4) Replace the OPE main board(JC92-02436A). 5) Assemble the OPE unit. 6) Turn the machine on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie