Danh mục sản phẩm

Code :

Code: 04-002
Display: LSU error Error: #04-002 Turn off then on
Description: LSU motor does not operate or the drive signal is abnormal.
Remedy: 1. Replace the LSU unit 2. Check the 24V power. If the voltage is not occurred, replce the SMPS board. 3. Check the motor connector, MAIN-PBA connector.

Code: 05
Display: Data Write Fail Check USB key
Description: Storing to the USB memory failed.
Remedy: Check the available USB memory space.

Code: 06
Display: DHCP problem DHCP has a problem. Reconfigure BOOTP/static IP
Description: There is a problem with the network.
Remedy: Check your network environment. You can change the network setting to BOOTP or STATIC.

Code: 06-006
Display: Toner cartridge error Error: #06-006/7/20 Open/close door
Description: Toner Cartridge is not installed properly or S-chip is defective.
Remedy: 1. Take out the toner cartridge and re-install it. 2. Replace the toner cartridge.

Code: 07
Display: DHCP problem DHCP has a problem. Switching to Auto IP
Description: There is a problem with the network.
Remedy: Check your network environment. You can change the network setting to BOOTP or STATIC.

Code: 08
Display: Door is open. Close it
Description: The front door is not securely latched.
Remedy: 1. Close the door. If the message is not disappeared, check the below steps. 2. Check that the door switch is pushed. 3. Check that the LCD message is changed by door switch action.

Code: 09
Display: Fax memory is almost full
Description: Fax memory is almost full
Remedy: Press the left/right arrow to highlight Cancel or Start, then press OK. If you select Cancel , the machine stops the fax job. If you select Start, the machine only sends scanned documents of the fax job.

Code: 10
Display: Fax unit error Error: #10-002 Turn off then on
Description: The fax card is not installed properly or is out of order.
Remedy: 1. Check the Fax card connector. 2. Replace the Fax Card. 3. If the problem persists, replace the PBA-MAIN.

< 1 2 3 4 5 > Last ›

0