Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp AR5125 — Trang 6/7

Code: U4 03

Description: ADU trailing edge plate operation error. The plate won’t move from home position more than 1 second after sending the command to leave home position. Or the plate won’t return to home position within 5 seconds after sending the command to return to home position.
Causes: Home position sensor defective Trailing edge plate shift motor defective Control PWB (PCU) defective Trailing edge plate driving belt or gear damaged or improperly adjusted.
Remedy: Check home position sensor with SIM9-2. Check trailing edge plate operation with SIM9-3. Check connection between PCU PWB, motor, and sensor. Remove ADU and check gear and belt for damage.

Code: U5 00

Description: RADF communication trouble Detail Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with RADF
Causes: Improper connection or broken wire of connector or harness RADF control PWB defective Control PWB (PCU) defective Malfunction due to noise
Remedy: Check communication line connector and harness. Clear the trouble by turning power supply On/Off.

Code: U5 01

Description: RADF resist sensor detection trouble
Causes: Sensor defective Improper connection of sensor harness inside RADF. RADF control PWB defective
Remedy: Check resist sensor detection with SIM2-2. Check sensor harness inside RADF.

Code: U5 02

Description: RADF eject/inversion sensor detection trouble
Causes: Defective sensor Improper connection of sensor harness inside RADF. RADF control PWB defective
Remedy: Check eject/inversion sensor detection with SIM2-2. Check sensor harness inside RADF.

Code: U5 03

Description: RADF timing sensor detection trouble
Causes: Defective sensor Improper connection of sensor harness inside RADF RADF control PWB defective
Remedy: Check timing sensor detection with SIM2-2. Check sensor harness inside RADF.

Code: U5 11

Description: Paper feed motor driving error
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check paper feed motor operation with SIM2-3,4.

Code: U5 12

Description: RADF transport motor driving error
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check paper feed motor operation with SIM2-5,6.

Code: U6 00

Description: Desk communication trouble. Failed communication with desk Communication line test error occurs when power is turned on or after the exit of a simulation mode.
Causes: Improper connection or broken wire of connector or harness Desk control PWB defective Control PWB (PCU) defective Malfunction due to noise.
Remedy: Clear the trouble by turning the power supply On/Off. Check communication line connector and harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie