Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp AR5132 — Trang 2/7

Code: EE EL

Description: Auto developing tone adjustment trouble (overtoner error). A sample data is less than 0 when auto developing adjustment is executed.
Causes: Toner density sensor defective Charging voltage or developing voltage improper. Toner density improper Developing unit defective PCU PWB defective
Remedy: Make auto developing adjustment with SIM25-2.

Code: EE EU

Description: Auto developing adjustment trouble (undertoner error). A sample data is less than 99 when auto developing adjustment is executed.
Causes: Toner density sensor defective Charging voltage or developing voltage improper Toner density improper Unit defective PCU PWB defective
Remedy: Make auto developing adjustment with SIM25-2.

Code: F1 00

Description: Sorter communication trouble. Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with sorter
Causes: Improper connection or broken wire of connector or harness between copier and sorter Sorter control PWB defective Control PWB (PCU) defective Malfunction due to noise
Remedy: Clear by turning the power supply OFF/ON. Check communication line connector and harness. Replace sorter control PWB or PCU PWB.

Code: F1 02

Description: Sorter transport motor error. Transport motor drive trouble
Causes: Motor lock
Remedy: Check transport motor operation with SIM3-3.

Code: F1 03

Description: Sorter guide bar rocking motor drive error
Causes: Motor lock Motor speed error Overcurrent to motor Sorter control PWB defective
Remedy: Check guide bar motor operation with SIM3-10.

Code: F1 04

Description: Sorter indexer lower limit detected. Indexer has exceeded lower limit.
Causes: Sensor defective Sorter control PWB defective
Remedy: Check sensor with SIM3-2.

Code: F1 05

Description: Sorter indexer upper limit detected. Indexer has exceeded upper limit
Causes: Sensor defective Sorter control PWB defective
Remedy: Check sensor with SIM3-2.

Code: F1 06

Description: Sorter bin shift motor error. 1) Bin shift is not completed within 2.5 seconds after bin shift request
Causes: Motor lock Improper motor speed Overcurrent to motor Sorter control PWB defective
Remedy: Check bin shift motor operation with SIM3-4.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie