Causes: DLUD3 does not turn on within the specified time.
Remedy: Case 1 Cause DLUD3 sensor trouble, paper feed unit harness disconnection Check & Remedy Check DLUD3 and the harness and the connector. Case 2 Cause Cassette 3 lift-up motor trouble, desk PWB, lift-up unit trouble Check & Remedy Check the lift-up unit.
Remedy: Case 1 Cause Motor lock, motor RPM abnormality, Over current to the motor, console finisher control PWB trouble Check & Remedy Use SIM 3-3 to check the staple motor operation.
Causes: RIC communication error, communication test error when turning on the power or after canceling the exclusive simulation.
Remedy: Case 1 Cause Improper connection or disconnection of the connector and the harness Check & Remedy Check the connector and the harness in the communication line. Turn OFF/ON the power to cancel the error. Case 2 Cause RIC control PWB trouble, control PWB (PCU) trouble, malfunction caused by noises Check & Remedy Turn OFF/ON the power to cancel the error.
Causes: Access abnormality to CPT-ASIC (ASIC does not operate normally.)
Remedy: Case 1 Cause CPT-ASIC abnormality MFP PWB abnormality Check & Remedy Turn OFF/ON repeatedly. If the trouble is not canceled, replace the MFP PWB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.