Mã lỗi Sharp ARC265P — Trang 4/10
Display: Service Call 103: Error
Description: Error in engine SRAM read/write detected at power ON.
Causes: Does error reoccur?
Display: Service Call 104: Error
Description: Error in engine EEPROM check total detected at power ON.
Causes: Does error reoccur?
Display: Service Call 105: Error
Description: EEPROM not detected at power ON.
Causes: Does EEPROM exist? Does error reoccur?
Display: Service Call 106: Error
Description: Error in engine control logic detected at power ON.
Causes: Does error reoccur?
Display: Service Call 107: Error
Description: Engine ROM check sum error.
Causes: Does error reoccur? Is error recovered by reloading PU F/W?
Display: Service Call 110: Error - 116: Error 110: Envelope Feeder 111: Duplex unit 112: 2nd Tray 113: 3rd Tray 114: 4th Tray 115: 5th Tray 116: Finisher
Description: Option unit for different model detected.
Causes: Is a proper option unit for the printer set?
Display: Service Call 120: Error
Description: PU unit fan motor error.
Causes: 1) Is fan in PU unit operating? 2) Error reoccurs after replacing fan motor.
Display: Service Call 121: Error
Description: High-voltage power supply I/F error.
Causes: Is cable between PU board andhighvoltage power LSI connected properly?