Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM277 — Trang 9/10

Code: U1-01

Description: FAX battery error
The SRAM backup battery voltage on FAX PWB falls.
Causes: The SRAM backup battery voltage on FAX PWB falls.
Remedy: Check voltage of the SRAM back up battery. Replace the battery.

Code: U1-02

Description: PANEL LOW battery error
The voltage of the panel clock function battery falls.
Causes: The voltage of the panel clock function battery falls.
Remedy: Check voltage of panel clock function battery. Replace the battery.

Code: U2-04

Description: EEPROM communication error
MCU PWB EEPROM access circuit failure
Causes: EEPROM defective ICU PWB EEPROM access circuit failure
Remedy: Check that the EEPROM is properly set. Clear trouble with SIM 16. Replace the MCU PWB. Remarks EEPROM abnormality

Code: U2-20

Description: Machine speed code data error
The machine (Boot) speed information is not identical to the model code speed information.
Causes: EEPROM defective SIM operation error
Remedy: Check that the machine set with SIM 26- 57 is identical to the model information. Remarks When the boot program speed code does not match with the body model information.

Code: U2-40

Description: CRUM chip communication error
Error in MCU-CRUM chip communication
Causes: CRUM chip failure Developing unit contact trouble MCU PWB failure
Remedy: Replace the CRUM chip. Check installation of the developing unit. Clear the trouble with SIM 16. Replace the MCU PWB. Remarks CRUM communication error

Code: U7-00

Description: RIC communication trouble
Error in communication with RIC Error in communication test after turning on the power or canceling SIM.
Causes: Connector harness contact trouble or disconnection RIC control PWB trouble MCU PWB failure Malfunction by noises
Remedy: Check the communication cable, connectors from the RIC box to the main body.

Code: U9-00

Description: MCU-OPE communication trouble
Communication establishment error/ framing/parity/protocol error
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and MCU PWB. Check the grounding of the copier. Check ROM on the operation control PWB.

Code: U9-80

Description: Operation control PWB communication trouble (Protocol)
Communication trouble between MCU and the operation control PWB (Protocol error)
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and MCU PWB. Check the grounding of the copier.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie