Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX6201N — Trang 25/26

Code: U5-31

Description: SPF tray lift-down trouble
Causes: STUD/STLD trouble
Remedy: Check STUD/STLD and its harness and connector. Check the lift-up unit.

Code: U6-09

Description: LCC lift motor trouble
Causes: Sensor trouble, LCC control PWB trouble, gear breakage, lift motor trouble
Remedy: Use SIM4-2 and 4-3 to check the operation of the sensor and the lift motor. Use SIM15 to cancel the trouble.

Code: U6-20

Description: LCC communication trouble
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, control (PCU) PWB trouble, malfunction due to electrical noises
Remedy: Turn OFF/ON the power to cancel the trouble. Check the connector and the harness of the communication line.

Code: U6-21

Description: LCC transport motor trouble
Causes: Motor lock, motor RPM abnormality, an overcurrent to the motor, LCC control PWB trouble
Remedy: Use SIM4-3 to check the operation of the transport motor.

Code: U6-22

Description: LCC 24V power abnormality
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, power unit trouble
Remedy: Check the connector and the harness of the power line. Check that the power unit and the LCC control PWB is of 24V.

Code: U6-23

Description: LCC tray descending trouble (reverse winding detection)
Causes: Reverse winding of the LCC tray wire is detected.
Remedy: Case 1 Cause Reverse winding of the wire Check and remedy Check the wire. Case 2 Cause Connector and harness connection trouble Check and remedy Check connection of the connector and the harness. Case 3 Cause Reverse winding detection SW-ON, reverse winding detection SW trouble, LCC control PWB trouble Check and remedy Replace the reverse winding SW and the LCC control PWB.

Code: U6-24

Description: LCC tray lock detection trouble
Causes: Malfunction of the LCC tray lock mechanism is detected.
Remedy: Case 1 Cause Tray lock mechanism trouble Check and remedy Check the tray lock mechanism. Case 2 Cause Connector and harness connection trouble Check and remedy Check connection of the connector and the harness. Case 3 Cause Tray lock detection sensor trouble, LCC control PWB trouble Check and remedy Replace the tray lock detection sensor and the LCC control PWB.

Code: U6-51

Description: LCC incompatibility trouble
Causes: Connection of the LCC,
Remedy: Connect the MX-LCX2/MX-LCX3.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie