Description: Communication trouble between the ICU and the scanner (ICU detection). Communication establishment error, framing error, parity error, protocol error
Causes: Slave unit PWB connector connection trouble. Slave unit PWB and ICU PWB harness trouble. Slave unit PWB mother board connector pin breakage.
Remedy: Check connection of the connector and the harness between the slave unit PWB and the ICU PWB. Check grounding of the machine.
Description: Communication trouble between the ICU and the PCU. (ICU detection). Communication establishment error, framing error, parity error, protocol error
Causes: Slave unit PWB connector connection trouble. Slave unit PWB and ICU PWB harness trouble. Slave unit PWB mother board connector pin breakage.
Remedy: Check connection of the connector and the harness between the slave unit PWB and the ICU PWB. Check grounding of the machine.
Description: Auto development adjustment trouble (Overtone abnormality) <Detected only when Sim. 25-2, no trouble memory, only display>. The sample level is 76 or less or the control voltage is 208 or above
Causes: Toner density sensor trouble, charging voltage / developing voltage trouble, toner density trouble, developing unit trouble, PCU PWB trouble.
Remedy: Execute the auto development adjustment with Sim. 25-2.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.