Description: Charger trouble. Main charger output abnormality (output open) / The trouble signal is outputted from the high voltage transformer
Causes: The main charger is not installed properly. The main charger is not assembled properly. The connector of the high voltage transformer is disconnected. The high voltage harness is disconnected or broken.
Remedy: Use Sim. 8-2 to check the operation of the main charger. Check for disconnection of the main charger. Replace the high voltage unit.
Description: Shading trouble white correction (SPF). The CCD white reference plate scan level is abnormal when the copy lamp is turned on
Causes: Installation failure of the harness to the CCD unit Dirt on themirror, the lens, and the reference white plate. Copy lamp lighting trouble. CCD unit abnormality, DSPF PWB abnormality. Shading Sim. not executed / Shading ROM abnormality.
Remedy: Check installation of the harnesses to the CCD unit. Check installation of the harnesses to the copy lamp unit. Clean the mirror, the lens, and the reference white plate. Check the CCD unit and the DSPF PWB.
Description: System memory trouble (The Tandem memory is not guaranteed.). The system memory cannot be accessed
Causes: Expansion memory installation state abnormality. Data garble.
Remedy: Check installation of the system expansion memory. Check memory read /write with Sim. 60-01. Replace the expansion memory. (If it is installed.) Replace the MFPC PWB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.