Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM850 — Trang 7/30

Code: EE-EU

Description: Auto development adjustment trouble (Undertone abnormality) <Detected only when Sim. 25-2, no trouble memory, only display). The sample level is 178 or above or the control voltage is 51 or less
Causes: Toner density sensor trouble, charging voltage / developing voltage trouble, toner density trouble, developing unit trouble, PCU PWB trouble.
Remedy: Execute the auto development adjustment with Sim. 25-2.

Code: F1-00

Description: Machine detection after-process system communication trouble. Communication line test error when turning ON the power or after canceling the exclusive simulation. Communication error with the finisher.
Causes: Contact failure or disconnection of the connector and harness between the PCU and the finisher. Finisher control PWB trouble. Control PWB (PCU) trouble. Malfunction due to noises.
Remedy: Canceled by turning OFF/ON the power. Check the connector and the harness of the communication line. Replace the finisher control PWB, or replace the PCU PWB.

Code: F1-01

Description: Jogger motor trouble. Jogger shift motor abnormality in the finisher staple compiler
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness / connector connection trouble.
Remedy: Use Sim. 3-3 to check the operation of the jogger motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-02

Description: Upper transport motor trouble. Finisher upper side transport section motor abnormality
Causes: Motor lock, control PWB trouble, encoder breakdown, connection harness/connector connection trouble.
Remedy: Use Sim. 3-3 to check the operation of the upper transport motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-03

Description: Lower transport motor trouble. Finisher lower side transport section motor abnormality
Causes: Motor lock, control PWB trouble, encoder breakdown, connection harness/connector connection trouble.
Remedy: Use Sim. 3-3 to check the operation of the lower transport motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-06

Description: Shift paper exit motor trouble. Finisher shift paper exit section motor abnormality
Causes: Motor harness short/open, control PWB trouble, connection harness/connector trouble.
Remedy: Use Sim. 3-3 to check the operation of the shift paper exit motor. Check connection from the control PWB to the motor. Replace the control PWB.

Code: F1-07

Description: Tray shift motor trouble. Finisher offset tray shift motor abnormality
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness/connector connection trouble
Remedy: Use Sim. 3-3 to check the operation of the tray shift motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-08

Description: Stapler front / rear motor trouble (finisher + saddle unit + inserter) Staple shift motor trouble (saddle finisher).
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness/connector connection trouble.
Remedy: Use Sim. 3-3 to check the operation of the staple back/ forward shift motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie