Description: Paper transport jam (ADU section) Paper Jam in Automatic Duplexing Unit - Please Clear Paper Path. Paper not reaching the ADU entrance sensor jam
Causes: Feed or transport roller possibly causing multiple feeding Sensor in the jamming area Refer to the table below. LGC board
Remedy: 1 Jamming transport path Open the cover of the unit/area whose picture is flashing on the control panel and remove any paper on the transport path. 2 Feed or transport roller possibly causing multiple feeding Check the feed roller. 3 Sensor in the jamming area • Sensor check (Refer to the table below) • Harness check • Connector check 4 LGC board • Harness check • Connector check • Board check Notes: If the jam is occurring in the ADU, PFC, PFU, CFD, LCF or PFP, check the board in each unit.
Description: Other paper jam Paper Jam in the engine. Please clear paper path Paper remaining jam on the transport path
Causes: Feed or transport roller possibly causing multiple feeding Sensor in the jamming area Refer to the table below. LGC board
Remedy: 1 Jamming transport path Open the cover of the unit/area whose picture is flashing on the control panel and remove any paper on the transport path. 2 Feed or transport roller possibly causing multiple feeding Check the feed roller. 3 Sensor in the jamming area • Sensor check (Refer to the table below) • Harness check • Connector check 4 LGC board • Harness check • Connector check • Board check Notes: If the jam is occurring in the ADU, PFC, PFU, CFD, LCF or PFP, check the board in each unit.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.