• Code: F107
• Description: /BOX partition damage
• Remedy: Initialize the Electronic Filing using the Setting Mode (08-666).

• Code: F108
• Description: /SHA partition damage
• Remedy: Initialize the shared folder using the Setting Mode (08-667).

• Code: F110
• Description: Communication error between System-CPU and Scanner-CPU
• Remedy: (1) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (2) Check the version of the system ROM on the SYS board. (3) Check the version of the scanner ROM version on the SLG board. (4) Replace the SYS board. (5) Replace the SLG board.

• Code: F111
• Description: Scanner response abnormality
• Remedy: (1) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (2) Check the version of the system ROM on the SYS board. (3) Check the version of the scanner ROM version on the SLG board. (4) Replace the SYS board. (5) Replace the SLG board.

• Code: F120
• Description: Database abnormality: Database is not operating normally.
• Remedy: (1) Rebuild the databases. (Perform 08-684.) (2) If the error is not recovered, initialize the HDD. (Key in “2” at 08-690.) * When “Rebuilding all databases (08-684)” is performed, all data in the Address Book and Mailbox are deleted. Make sure to back up these data in advance of rebuilding and restore the data after rebuilding.

• Code: F130
• Description: Invalid MAC address
• Remedy: Compare the serial number of the equipment with a number displayed in 08-995. If they are different, enter the correct serial number at 08-995.

• Code: F200
• Description: Data overwrite kit (GP-1060) is taken off
• Remedy: Clear the service call “F200”. (Key in “0” at 08-633.) * When the Data overwrite kit (GP-1060) is taken off from the equipment, the service call “F200” occurs.

• Code: F350
• Description: SLG board abnormality
• Remedy: (1) Check if the conductor pattern on the SLG board is short circuited or open circuited. (2) Replace the SLG board.