Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 4500c — Trang 7/34

Code: SC312

Description: Charge, development error 1: K 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings).
Remedy: • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack

Code: SC313

Description: Charge, development error 2: M 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings).
Remedy: • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack

Code: SC314

Description: Charge, development error 3: C 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings).
Remedy: • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack

Code: SC315

Description: Charge, development error 4: Y 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings).
Remedy: • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack

Code: SC316

Description: AC bias charge adjustment error 1: K An average value of 8 ms/cycle could not be attained for Vpp (AC charge bias) within 15 attempts. -or- The output of the AC charge boosted Vpp over 2.8 kV.
Remedy: • Charge roller dirty • Charge roller defective • Bias terminal connection at the PCU receptacle is dirty or defective

Code: SC317

Description: AC bias charge adjustment error 2: M An average value of 8 ms/cycle could not be attained for Vpp (AC charge bias) within 15 attempts. -or- The output of the AC charge boosted Vpp over 2.8 kV.
Remedy: • Charge roller dirty • Charge roller defective • Bias terminal connection at the PCU receptacle is dirty or defective

Code: SC318

Description: AC bias charge adjustment error 3: C An average value of 8 ms/cycle could not be attained for Vpp (AC charge bias) within 15 attempts. -or- The output of the AC charge boosted Vpp over 2.8 kV.
Remedy: • Charge roller dirty • Charge roller defective • Bias terminal connection at the PCU receptacle is dirty or defective

Code: SC319

Description: AC bias charge adjustment error 4: Y An average value of 8 ms/cycle could not be attained for Vpp (AC charge bias) within 15 attempts. -or- The output of the AC charge boosted Vpp over 2.8 kV.
Remedy: • Charge roller dirty • Charge roller defective • Bias terminal connection at the PCU receptacle is dirty or defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie