Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 527S — Trang 11/15

Code: E400

Description: Face Up Cover Jam
Causes:
Remedy: Change the sensor Lever. Change the cable. Change the relay board or PU board.

Code: E52A

Description: Occur Duplex jam and Paper on the Transport Path
Causes:
Remedy: Take out the jammed paper. Change the sensor Lever. Change the Duplex board.

Code: E57A

Description: Occur Duplex jam and Paper on the Entry Path
Causes:
Remedy: Take out the jammed paper. Change the sensor Lever. Change the Duplex board.

Code: E580, E520

Description: Indicates that jam has occurred in the vicinity of Duplex unit. Error E580 : Duplex Reversal Error E520 : Duplex Input
Causes:
Remedy:

Code: E58A

Description: Occur Duplex jam and Paper on the Reversal Path
Causes:
Remedy:

Code: E711

Description: Jam due to non-arrival at the hopping sensor – After paper feeding is started, the hopping sensor does not become active. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E712

Description: Jam due to non-arrival at the regist paper sensor – After feeding for a simplex document scan is started, the regist paper sensor does not become active. (Simplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E713

Description: Jam due to non-arrival at the reverse paper sensor – After feeding for a duplex document scan is started, the reverse paper sensor does not become active. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie