Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 527S — Trang 13/15

Code: E727

Description: Activation of a sensor at an unintended timing – The scan sensor, regist paper sensor, hopping sensor or reverse paper sensor becomes active at an unintended timing. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E728

Description: Detection of chattering of a sensor – Chattering of a sensor is detected. Once a sensor becomes active, the sensor becomes inactive in 5mm feeding of the document. Then the inactive sensor becomes active in the next 5mm feeding. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E741

Description: Reverse paper sensor stuck jam/ detection of out-of-spec oversized documents – The reverse paper sensor does not become inactive when the document is transferred to the distance exceeding the maximum page size. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E742

Description: Detection of out-of-spec undersized documents – The reverse paper sensor becomes inactive before the document is transferred by the distance equal to the minimum page size. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E743

Description: Non-arrival at the regist paper sensor at reversing to the front – After reversing to the front, the regist paper sensor does not become active in a lapse of a certain period of time. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E744

Description: Non-arrival at the regist paper sensor at reversing to the back – When the document is transferred following reversal to the back, the regist paper sensor does not become active. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E778

Description: Remaining document detection at power on – A sensor other than the document set sensor becomes active when the power is turned on or the cover is opened and closed during operation.
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.

Code: E779

Description: Activation of only the document set sensor – Only the document set sensor becomes active at initialization of the ADF stopper gate.
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie