Description: Jam due to document removal – In the middle of feeding for a simplex document scan, the document set sensor becomes inactive. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Activation of the hopping sensor at document reversal – The hopping sensor becomes active when the reverse paper sensor is inactive. Multifeed of documents is detected. (Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Jam due to non-arrival at the scan sensor – Although the fed document is transferred to a certain distance, the scan sensor does not become active. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Regist paper sensor stuck jam/detection of out-of-spec oversized documents – Once the regist paper sensor becomes active, it does not become inactive when the fed document is transferred to the distance exceeding the maximum page size. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Detection of out-of-spec undersized documents – Once the regist paper sensor becomes active, it becomes inactive before the fed document is transferred by the distance equal to the minimum page size. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Scan sensor stuck jam – The scan sensor does not become inactive even when the fed document is transferred by 60mm after the regist paper sensor becomes inactive. (Simplex and Duplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Detection of a too little space between documents – Before the document is transferred by 31mm after the regist paper sensor becomes inactive, the sensor becomes active. Detection of a too little space between the documents. (Simplex)
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Description: Activation of the reverse paper sensor for the documents not to be reversed – Switching to the first separator is not carried out normally causing activation of the reverse paper sensor. (Simplex and Duplex) • The reverse paper sensor becomes active in feeding of a simplex document. • The reverse paper sensor becomes active between reversal to the back and activation of the regist paper sensor.
Causes:
Remedy: Open the ADF cover, remove every jammed document from the paper feed path, and close the ADF cover.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.