Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 6570C — Trang 16/44

Code: CD61

Description: Sub-hopper toner motor-Y abnormality.
Causes: Sub-hopper toner motor-K/-C/-M/-Y EPU board LGC board
Remedy: EPU tray (process unit) • Connection check (05-2788) • Connector check • Harness check Sub-hopper toner motor (M19 - M22) • Motor check (Perform the output check: K: 03-227, C: 03-226, M: 03- 225, Y: 03-224 • Sensor check (Perform the input check: 03-[ALL]OFF/[4]/[D/E/F/G]) • Connector check • Harness check EPU board • Connector check (CN551, CN553, CN554, CN555, CN556) • Board check LGC board • Connector check (CN308) • Board check

Code: CD62

Description: Sub-hopper toner motor-M abnormality.
Causes: Sub-hopper toner motor-K/-C/-M/-Y EPU board LGC board
Remedy: EPU tray (process unit) • Connection check (05-2788) • Connector check • Harness check Sub-hopper toner motor (M19 - M22) • Motor check (Perform the output check: K: 03-227, C: 03-226, M: 03- 225, Y: 03-224 • Sensor check (Perform the input check: 03-[ALL]OFF/[4]/[D/E/F/G]) • Connector check • Harness check EPU board • Connector check (CN551, CN553, CN554, CN555, CN556) • Board check LGC board • Connector check (CN308) • Board check

Code: CD63

Description: Sub-hopper toner motor-C abnormality.
Causes: Sub-hopper toner motor-K/-C/-M/-Y EPU board LGC board
Remedy: EPU tray (process unit) • Connection check (05-2788) • Connector check • Harness check Sub-hopper toner motor (M19 - M22) • Motor check (Perform the output check: K: 03-227, C: 03-226, M: 03- 225, Y: 03-224 • Sensor check (Perform the input check: 03-[ALL]OFF/[4]/[D/E/F/G]) • Connector check • Harness check EPU board • Connector check (CN551, CN553, CN554, CN555, CN556) • Board check LGC board • Connector check (CN308) • Board check

Code: CD64

Description: Sub-hopper toner motor-K abnormality.
Causes: Sub-hopper toner motor-K/-C/-M/-Y EPU board LGC board
Remedy: EPU tray (process unit) • Connection check (05-2788) • Connector check • Harness check Sub-hopper toner motor (M19 - M22) • Motor check (Perform the output check: K: 03-227, C: 03-226, M: 03- 225, Y: 03-224 • Sensor check (Perform the input check: 03-[ALL]OFF/[4]/[D/E/F/G]) • Connector check • Harness check EPU board • Connector check (CN551, CN553, CN554, CN555, CN556) • Board check LGC board • Connector check (CN308) • Board check

Code: CD71

Description: Waste toner transport motor locking error: The auger in the waste toner transport path does not rotate.
Causes: Waste toner transport motor Auger lock detection sensor EPU board LGC board
Remedy: EPU tray (process unit) • Pull out the process unit, rotate the gear counterclockwise and check if the load is extremely heavy. • Is the load still extremely heavy after the gear is rotated for a while to discharge the toner from the waste toner transport path? • Is the load still extremely heavy after the actuator is removed, the auger is pulled out and clean them? Waste toner transport motor (M31) • Motor check (Perform the output check: 03-234) • Connector check • Harness check Auger lock detection sensor (S42) • Sensor check (Perform the input check: K: 03-[FAX]ON/[0]/[B]) • Connector check • Harness check EPU board • Connector check (CN551, CN557) • Board check LGC board • Connector check (CN308, CN331) • Board check

Code: CD80

Description: TRU waste toner motor locking error: The auger (TRU side) in the TRU waste toner transport path does not rotate.
Causes: TRU waste toner motor ADU board PFC board
Remedy: TRU waste toner motor (M10) • Motor check (Perform the output check: 03-239) • Connector check • Harness check • Drive section check ADU board • Connector check (CN491, CN497) • Board check PFU board • Connector check (CN511) • Board check

Code: CD81

Description: TRU waste toner transport motor locking error: The auger (waste toner box side) in the TRU waste toner transport path does not rotate.
Causes: TRU waste toner transport motor ADU board PFC board
Remedy: TRU waste toner transport motor (M11) • Motor check (Perform the output check: 03-240) • Connector check • Harness check • Drive section check ADU board • Connector check (CN491, CN497) • Board check PFC board • Connector check (CN511) • Board check

Code: CD82

Description: TRU waste toner full-status error
Causes: TRU waste toner amount detection sensor ADU board PFC board
Remedy: TRU waste toner box • Check if the TRU waste toner box is full of used toner. Replace it, if it is full. TRU waste toner amount detection sensor (S13) • Sensor check (Perform the input check: K: 03-[ALL]OFF/[5]/[E]) • Connector check • Harness check ADU board • Connector check (CN491, CN497) • Board check PFC board • Connector check (CN511) • Board check
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie