Description: SMB user authentication fail or SMB Scanner login fail Cause: In SMB scan, login access is rejected. Request is not allowed.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. About user settings, confirm the following with the system administrator. Restriction on loginable workstation. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: Problem with share name in SMB scan server Cause: Problem with share name in SMB scan server.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check SMB Server connection, or check share name you specified. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: SMB Scan User Over limit Cause: Exceed the upper limit of the number of SMB scan users.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check the number of users who use the server at the same time is not exceeding the upper limit. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: SMB Error Cause: SMB scan client has no access right (Win9x).
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check if the specified user can read and write file at the storage location. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: SMB Scan Host Name Resolution Fail Cause: SMB server name resolution failed.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check DNS connection, or check if name of forwarding destination server is registered with DNS. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: SMB Scan DNS Server Not Set Cause: DNS server is not set.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Set DNS address, or set forwarding destination server address as IP address. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Take corrective actions at the host side.
Description: In SMB scan, server connection error Cause: Cannot find SMB server.
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check if this device can communicate by network with the forwarding destination SMB server. • Check connection of network cable, then check the TCP/IP setting. • Check communication with Port 137(UDP), 138(UDP), and 139(TCP). 2. Check setting of WINS server and if server name can be resolved correctly. 3. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 4. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Description: Problem with SMB scan login name or password Cause: Invalid password (Win9x).
Remedy: The machine will recover after the OK or Close button is pressed or message is displayed for specified time. If the error persists: 1. Check if password is correct. 2. Perform the following in sequence. • " Network System Fault Check" • " Network-related Details Check Flow" 3. Ensure that the error is replicated after the printer is powered Off and then On, and then replace (ESS PWB).
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.