Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5632 — Trang 22/30

Code: 11-140-171, 11-142-171

Description: HVF Bin 1 Exit Sensor RAP 11-140-171 The paper leading edge is late arriving at the bin 1 exit sensor. 11-142-171 The paper trailing edge is late leaving the bin 1 exit sensor.
Remedy: . shows the location of the components. Enter dC330, code 11-140. Manually activate the stacker exit sensor, Q11-140. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-140. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Stacker exit sensor, PL 11.156. • HVF Control PWB, PL 11.157 Item 2 Enter dC330, code 11-002. Energize the exit diverter solenoid SOL 11-002. The solenoid energizes. Y↓N→Go to Flag 2. Check the solenoid, SOL 11-002. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J102, HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • Exit diverter solenoid, PL 11.150 Item 16. • HVF control PWB, PL 11.157 Item 2 Enter dC330, code 11-001 to run the exit feed motor 2, MOT 11-001. The motor runs. Y↓N→Go to Flag 3. Check the exit feed motor 2, MOT 11-001. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Exit feed motor 2, PL 11.150 Item 10 • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 11. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Stacker exit sensor, PL 11.156 Item 2. • Exit diverter solenoid, PL 11.150 Item 16. • Diverter gate, PL 11.153 Item 9. • Exit feed motor 2, PL 11.150 Item 10. • HVF control PWB, PL 11.157 Item 2.

Code: 11-157-171, 11-161-171

Description: HVF Buffer Position Sensor RAP 11-157-171 The paper leading edge is late arriving at the buffer position sensor. 11-161-171 The paper trailing edge is late leaving the buffer position sensor.
Remedy: . shows the location of the components. Enter dC330, code 11-157. Manually activate the buffer position sensor, Q11-157. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-157. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer position sensor, PL 11.156. • HVF Control PWB PL 11.157 Item 2. Enter dC330, code 11-000 to run the entry feed motor 1, MOT 11-000. The motor runs. Y↓N→Go to Flag 2. Check the entry feed motor 1, MOT 11-000. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Entry feed motor 1, PL 11.150 Item 12. • HVF control PWB, PL 11.157 Item 2. Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 13. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Buffer position sensor, PL 11.156 Item 2. • Entry feed motor 1, PL 11.150 Item 12. • HVF control PWB, PL 11.157 Item 2.

Code: 11-158-171, 11-160-171, 162, 163-171

Description: HVF BM Entry RAP 11-158-171 The paper leading edge is late leaving the HVF booklet exit sensor to enter into the booklet maker. 11-160-171 The paper leading edge is late arriving at the booklet maker entry sensor. 11-162-171 The paper trailing edge is late leaving the booklet maker entry sensor. 11-163-171 The paper trailing edge is late leaving the HVF booklet exit sensor to enter into the booklet maker.
Remedy: and. shows the location of the components. Enter dC330, code 11-158. Manually activate the HVF booklet exit sensor, Q11-158. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-158. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • HVF booklet exit sensor, PL 11.156. • HVF Control PWB, PL 11.157 Item 2 Enter dC330, code 11-074. Energize the BM diverter solenoid SOL 11-074. The solenoid energizes. Y↓N→Go to Flag 2. Check the solenoid, SOL 11-074. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J102, HVF control PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM diverter solenoid, PL 11.150 Item 16. • HVF control PWB, PL 11.157 Item 2 Enter dC330, code 11-080 to run the bypass feed motor, MOT 11-080. The motor runs. Y↓N→Go to Flag 3. Check the bypass feed motor, MOT 11-080. Refer to: • GP 10 How to Check a Motor. • P/J103, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Bypass feed motor, PL 11.150 Item 24. • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 19. Enter dC330, code 11-160. Manually activate the BM entry sensor, Q11-160. The display changes. Y↓N→Go to Flag 4. Check the sensor, Q11-160. Refer to: • GP 11 How to Check a Sensor. • P/J551, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • BM entry sensor, PL 11.161 Item 16. • HVF Control PWB, PL 11.157 Item 2 Enter dC330, code 11-060 to run the BM compiler motor, MOT 11-060. The motor runs. Y↓N→Go to Flag 5. Check the BM compiler motor, MOT 11-060. Refer to: • GP 10 How to Check a Motor. • P/J554, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • BM compiler motor, PL 11.166 Item 1 • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.166 Item 16. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • HVF booklet exit sensor, PL 11.156. • BM diverter solenoid, PL 11.150 Item 16. • BM diverter gate, PL 11.153 Item 9, • BM compiler motor, PL 11.166 Item 1. • Bypass feed motor 2, PL 11.150 Item 14. • HVF control PWB, PL 11.157

Code: 11-160-170, 11-162-170

Description: HCSS BM Entry Jam RAP 11-160-170 The lead edge of a sheet is late to the BM entry sensor. 11-162-170 The trail edge of a sheet is late from the BM entry sensor.
Remedy: Go to Flag 3, check the connectors P/J553 and P/J426 and the harness between. The harness and connectors are good. Y↓N→Repair the wiring or connectors. Enter dC330 code 11-160. Actuate the BM entry sensor, Q11-160. The display changes. Y↓N→Go to Flag 1. Check Q11-160. Refer to: • GP 11, How to Check a Sensor. • P/J551, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM entry sensor, PL 11.80 Item 16. • BM PWB, PL 11.86 Item 10. Enter dC330 code 11-060 BM compiler motor, MOT11-060. MOT11-060 runs. Y↓N→Go to Flag 2. Check MOT11-060. Refer to: • GP 10 How to Check a Motor. • P/J554, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary • BM compiler motor, PL 11.86 Item 1. • BM PWB, PL 11.86 Item 10. Unlatch the entrance baffle assembly, PL 11.80 Item 22. Run again MOT11-060. The BM entry roll rotates. Y↓N→Check the following components: • BM compiler motor belt, PL 11.86 Item 15. • BM entry roll pulley, PL 11.80 Item 14. • BM entry roll, PL 11.80 Item 15. Install new components as necessary. Enter dC330 code 11-074 to energize the BM diverter solenoid, SOL 11-074. The solenoid energizes. Y↓N→Go to Flag 4, check the BM diverter solenoid, SOL 11-074. Refer to: • GP 12, How to Check a Solenoid or Clutch. • P/J418, HCSS PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM diverter solenoid, PL 11.68 Item 5. • HCSS PWB, PL 11.92 Item 5. The fault may be intermittent, check for damaged wiring or bad connectors.

Code: 11-164-171, 11-165-171

Description: HVF Buffer Path RAP 11-164-171 The paper trailing edge is late leaving the buffer path sensor. 11-165-171 The paper leading edge is late arriving at the buffer path sensor.
Remedy: . shows the location of the components. Enter dC330, code 11-164. Manually activate the buffer path sensor, Q11-164. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-164. Refer to: • GP 11 How to Check a Sensor. • P/J101, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer path sensor, PL 11.156. • HVF Control PWB, PL 11.157 Item 2 Enter dC330, code 11-079 to run the Buffer feed motor 1, MOT 11-079. The motor runs. Y↓N→Go to Flag 2. Check the entry feed motor 1, MOT 11-079. Refer to: • GP 10 How to Check a Motor. • P/J102, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Buffer feed motor, PL 11.150 Item 10. • HVF control PWB, PL 11.157 Item 2 Check the drive belt on the motor. The drive belt is good. Y↓N→Install a new drive belt, PL 11.150 Item 23. The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Buffer path sensor, PL 11.156. • Buffer feed motor, PL 11.150 Item 10. • HVF control PWB, PL 11.157 Item 2.

Code: 11-170-170, 11-172-170

Description: HCSS BM Exit Jam RAP 11-170-170 The lead edge of a sheet is late arriving at the BM paper present sensor. 11-172-170 The trail edge of a sheet is late leaving the BM paper present sensor.
Remedy: Lower the stapler bracket assembly. Enter dC330 code 11-190 BM paper present sensor, Q11-190. Actuate Q11-190. The display changes. Y↓N→Go to Flag 1. Check Q11-190. Refer to: • GP 11, How to Check a Sensor. • P/J556, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary: • BM paper present sensor, PL 11.88 Item 5. • BM PWB, PL 11.86 Item 10. Go to Flag 1. Check the connectors and harness between PJ568 and P/J556. Refer to GP 7. The wiring and connectors are good. Y↓N→Repair the wiring or install new components as necessary. 11-170 Only: Enter dC330 code 11-060 BM compiler motor, MOT11-060. MOT11-060 runs. Y↓N→Go to Flag 2. Check MOT11-060. Refer to: • GP 10 How to Check a Motor. • P/J554, BM PWB. • 11C-170 HCSS BM Power Distribution RAP. Install new components as necessary • BM compiler motor, PL 11.86 Item 1. • BM PWB, PL 11.86 Item 10. 11-170 Only: Unlatch the entrance baffle assembly, PL 11.80 Item 22. Run again MOT11-060. The BM entry roll rotates. Y↓N→Check the following components: • BM compiler motor belt, PL 11.86 Item 15. • BM entry roll pulley, PL 11.80 Item 14. • BM entry roll, PL 11.80 Item 15. Install new components as necessary. 11-172 Only: Make a 60 page booklet (15 sheets of paper). Check that the top sheet of paper has not been torn from the booklet. The booklet is good. Y↓N→Check that the components in the lower crease roll gear and clutch assembly are correctly installed. Refer to the replacement procedure-170 BM Crease Rolls, Gears and Bearings. Perform SCP 6 Final Actions.

Code: 11-172-171

Description: HVF BM Compiler Exit Jam RAP 11-172-171 The trail edge is late leaving the BM compiler exit sensor.
Remedy: Lower the stapler bracket assembly. Enter dC330 code 11-190 BM paper present sensor, Q11-190. Actuate Q11-190. The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-190. Refer to: • GP 11, How to Check a Sensor. • P/J556, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary: • BM paper present sensor, PL 11.168 Item 5. • BM PWB, PL 11.166 Item 10. Go to Flag 1. Check the connectors and harness between PJ568 and P/J556. Refer to GP 7. The wiring and connectors are good. Y↓N→Repair the wiring or install new components as necessary. Enter dC330 code 11-060 BM compiler motor, MOT11-060. MOT11-060 runs. Y↓N→Go to Flag 2. Check MOT11-060. Refer to: • GP 10 How to Check a Motor. • P/J554, BM PWB. • 11A-171 HVF Power Distribution RAP. Install new components as necessary • BM compiler motor, PL 11.166 Item 1. • BM PWB, PL 11.166 Item 10. Unlatch the entrance baffle assembly, PL 11.80 Item 22. Run again MOT11-060. The BM entry roll rotates. Y↓N→Check the following components: • BM compiler motor belt, PL 11.166 Item 15. • BM entry roll pulley, PL 11.161 Item 14. • BM entry roll, PL 11.161 Item 15. Install new components as necessary. Make a 60 page booklet (15 sheets of paper). Check that the top sheet of paper has not been torn from the booklet. The booklet is good. Y↓N→Check that the components in the lower crease roll gear and clutch assembly are correctly installed. Refer to the replacement procedure-171 BM Crease Rolls, Gears and Bearings. Perform SCP 6 Final Actions.

Code: 11-173-171 ... 11-177-171

Description: HVF Offset Unit RAP 11-173-171 The offset unit has failed to find its initialization point. 11-174-171 The offset unit has failed to return the home position. 11-175-171 The offset unit has failed to move from the home position. 11-176-171 The offset unit has failed to return to the away position. 11-177-171 The offset unit has failed to move from the away position.
Remedy: . shows the location of the components. Enter dC330, code 11-337. Manually activate the bin 1 offset sensor, Q11-337. . The display changes. Y↓N→Go to Flag 1. Check the sensor, Q11-337. Refer to: • GP 11 How to Check a Sensor. • P/J302, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Bin 1 offset sensor, PL 11.140. • HVF Control PWB, PL 11.157 Item 2 Enter dC330, code 11-187. Manually activate the offset index sensor, Q11-187. The display changes. Y↓N→Go to Flag 2. Check the sensor, Q11-187. Refer to: • GP 11 How to Check a Sensor. • P/J302, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Offset index sensor, PL 11.161. • HVF Control PWB, PL 11.157 Enter dC330, code 11-176. Manually activate the offset away sensor, Q11-176. The display changes. Y↓N→Go to Flag 3. Check the sensor, Q11-176. Refer to: • GP 11 How to Check a Sensor. • P/J302, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Offset away sensor, PL 11.140. • HVF Control PWB PL 11.157 Item 2 Enter dC330, code 11-034 to run the bin offset motor, MOT 11-034. The motor runs. Y↓N→Go to Flag 4. Check the bin offset motor, MOT 11-034. Refer to: • GP 10 How to Check a Motor. • P/J801, HVF Control PWB • 11A-171 HVF Power Distribution RAP Install new components as necessary: • Bin offset motor, PL 11.140 Item 19. • HVF control PWB, PL 11.157 Item 2 The fault may be intermittent, check for damaged wiring or bad connectors. If necessary install new components: • Bin 1 offset sensor, PL 11.140. • Offset index sensor, PL 11.140. • Offset away sensor, PL 11.140. • Bin offset motor, PL 11.140 Item 19 • HVF control PWB, PL 11.157 Item 2
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie