Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Zebra 105SL

Code: 01

Display:
Description: No LEDs light and no display.
Causes: AC power source not live. Power cord not fully inserted into power source or power entry module. AC fuse blown. AC fuse blown. Power supply faulty. Main logic board failure.

Code: 02

Display:
Description: All LEDs light, but nothing displays on LCD and printer does not operate.
Causes: Main logic board or Flash faulty.

Code: 03

Display:
Description: All LEDs flash on and off.
Causes: No significant amount of DRAM tested good.

Code: 04

Display:
Description: Take Label LED flashing.
Causes: Printer misconfigured for Peel-Off Mode.

Code: 05

Display:
Description: Printer locks up while running Power-On Self Test.
Causes: Main logic board failure.

Code: 06

Display: EEPROM CHECKSUM INVALID
Description:
Causes: EEPROM checksum is incorrect.

Code: 07

Display: ERROR CONDITION PAPER OUT
Description: Printer stops and ERROR LED flashes.
Causes: No media loaded or incorrectly loaded. Misadjusted media sensor. Maximum label length set shorter than label length. Printer set for non-continuous media, but continuous media is loaded.

Code: 08

Display: ERROR CONDITION RIBBON OUT
Description: Printer stops and ERROR LED flashes.
Causes: For Thermal Transfer: Ribbon not loaded or incorrectly loaded. or Ribbon sensor not sensing ribbon that is correctly loaded.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie