Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Zebra S4M — Trang 5/5

Code: 33

Display:
Description: The LCD displays a language that I cannot read
Causes: The language parameter was changed through the control panel or a firmware command.

Code: 34

Display:
Description: The LCD is missing characters or parts of characters
Causes: The LCD may need replacing.

Code: 35

Display:
Description: Changes in parameter settings did not take effect
Causes: Parameters are set incorrectly. A command turned off the ability to change the parameter. A command changed the parameter back to the previous setting. If the problem continues, there may be a problem with the main logic board.

Code: 36

Display:
Description: The printer fails to calibrate or detect the top of the label.
Causes: The printer was not calibrated for the label being used. The printer is configured for continuous media. The driver or software configuration is not set correctly.

Code: 37

Display:
Description: Non-continuous labels are being treated as continuous labels.
Causes: The printer is configured for continuous media. The printer was not calibrated for the media being used.

Code: 38

Display:
Description: All lights are on, but nothing displays on the LCD, and the printer locks up.
Causes: Internal electronic or firmware failure.

Code: 39

Display:
Description: The printer locks up while running the Power-On Self Test.
Causes: Main logic board failure.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie